1) The dual focal length laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head.
2) Check the straightness of the fiber laser cutting machine track and the verticality of the machine every six months, and maintain and debug it in time if it is found to be abnormal. If this is not done, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the most important and must be done.
3) Use a vacuum cleaner to remove dust and dirt in the machine once a week, and all electrical cabinets should be closed to prevent dust.
4) Always check the steel belt of the fiber laser cutting machine, and be sure to tighten it. Otherwise, there is a problem in operation, which may injure people, and even lead to death. The steel belt looks like a small thing, but the problem is still a bit serious.
5) The guide rails of the fiber laser cutting machine should be cleaned frequently to remove dust and other debris, to ensure that the normal rack of the equipment should be wiped frequently, and lubricating oil should be added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.
JINAN QITUO MACHINERY specializes in the research and development of laser and cnc technology, established in 2008, more than 10 years experience in laser and cnc industry.